Availability: In stock
|Size||Shoulder||Pit to Pit||Length||Sleeve|
|Polyester 60%||Cotton 24%||Nylon 16%||[Main fabric]|
|Polyester 95%||Polyurethane 5%||[Rib]|
LANTERN 2021-22 Autumn Winter Collection.
・This item is based on HAPPY SUITS, an outer wear in a cold and cold area adopted by the US Marine Corps (USMC), and has been incorporated into modern fashion. The stand type collar has velcro pockets for storing the hood. The front and waist pockets use waterproof zippers. The inside pocket is upgraded from the military outer LEVEL 7 pocket to more functions.
・Based on the theme of "choosing to wear it instead of a bag", the mesh pockets and multi-functional pockets make it possible to go out empty-handed. Since this item can be worn as an outer, it has a slightly large silhouette. The front swinging on the pattern of the sleeves creates a three-dimensional look, and creates a unique silhouette with mobility.
・The outer fabric is made of high-density cotton polyester nylon fabric with a moderate resilience. The surface of the fabric is treated with micro peach to create an elegant and moist texture. This is a very lightweight outer with excellent design and functionality.
・By heating device, the back part can be heated and then adjusted.
・The water-repellent fabric used for the outer fabric is resistant to dirt and repels water drops.
・Uses batting and lining using graphene with excellent thermal conductivity of carbon-derived fiber.
・Achieves the highest performance at low temperature and low power with efficient heat conduction. The batting made of graphene contains a large amount of air, has excellent bulkiness, is lightweight, and has excellent heat retention.
・LANTERN logo print tape with laser cut black reflector is used for the collar hanging on the back collar. When the light hits you in a dark place, a black reflector reflects your location.
◆Characteristics of Heating Device Wear
This is a cotton padding wear that can adjust the temperature with the power temperature adjustment switch on the chest. The heating device is a system that works by connecting the charging battery to the USB plug of the machine, and the switch changes color depending on the set temperature. The heat source is made from carbon fiber, and it warms from the core of the body by far infrared ray effect. The operating time of the heating device varies depending on the battery capacity and temperature setting.
◆How to use the heating device
1: Insert the charging battery into the left side storage pocket and plug in the USB plug. * Please check the remaining amount of charge battery and energization (the battery protection function is not activated).
2: Press and hold the power switch on the chest for 2 to 3 seconds, and the LED will blink in 4 colors and the heating device will be activated. It heats up rapidly while red (Ultrahigh temperature) is flashing. It will automatically change to purple (medium temperature) after about 5 minutes without operating the switch.
3: After turning on the power, you can change the temperature to your preference by briefly pressing the switch. (* The lighting color changes depending on the temperature.)
4: Press and hold the power temperature switch on the chest (2-3 seconds) and the LED will blink in 4 colors and the heating device will stop.
◆About charging battery
USB output port output voltage: 5V output current: 2A or more usable time (5000 mAh)
Ultrahigh Temperature (Red): 50 °C/1.85 H
High Temperature (Yellow): 40 °C/2.5 H
Medium Temperature (Purple): 30 °C/3.75 H
Low Temperature (Blue): 20 °C/7.5 H (* The above description applies when the ambient temperature is 5 °C.) Temperature and time are approximate. Not an absolute value.
・We recommend wet cleaning at a dry cleaner's. Please refer to the laundry name for details. (* Please be sure to remove the rechargeable battery.)
・It was planned and produced as supplementary heating clothing to be worn on clothes. Do not use it for any other reason.
・Please be careful not to burn yourself
・Please note that we are not responsible for any damage, repair, accident, or other malfunction that may occur if the product is used for purposes other than its intended purpose.
◆Shipping out of Japan
*Please contact us for details as some countries are unable to ship.
*Please understand that we will ship the battery and the code of the clothing in "connected" state.
|Size||Shoulder||Pit to Pit||Length||Sleeve|
|[Main fabric]||Polyester 60%||Cotton 24%||Nylon 16%|
|[Rib]||Polyester 95%||Polyurethane 5%|
PRODUCTION AREA : Japan
Next generation of tech-infused fashion
LANTERN is based on the concept of "outdoor wear for adults who live in the city to be seamless with nature ", and proposes a HEATING DEVICE WEAR that has functions for both urban and outdoor scenes.
[Fashion × Technology] The sophisticated outdoor specification that prioritizes functionality which transcends everything.
RETURNS / CANCELLATIONS
No returns are accepted. Please be aware of this before placing your order. You can cancel an order as long as we have not shipped the item out yet. If you decide to cancel an order, please contact us as soon as possible.
All shipping fees are determined by the weight of the package and the destination country. Please view the EMS Rate Schedule for fees.
DEVALUATION OF MERCHANDISE
Please note that we cannot and will not devalue an item. The invoice and shipment label will have the merchandise valued at the price you have purchased it for.
IMPORT TAX, VAT, DUTIES
All prices listed on our website do not include import taxes, VAT, or any other form of import duties. Please be aware of your country's international policies before placing your order.
Below is a guide of how we measure the items. Each clothing garment is laid flat when we measure it.